From 3801eb768482dbadd0b21359a16d862bbe2fe8a1 Mon Sep 17 00:00:00 2001
From: CrispyPin
-Turns out that the second gear (directly engaged with the escapement gear) is slipping, because the "top"(back? relative to the clock face) bearing has been destroyed.
+Turns out that the second gear (directly engaged with the escapement gear) is slipping, because the "top" (back relative to the clock face) bearing has been destroyed.
I can fix this.
I stripped a short length of cable-tie into a 0.5mm diameter wire, bent it into a hook, and filled the side of the bearing thats broken.
-And to hold the wire in place, I used duct tape because I don't respect the Art of Watchmaking have anything better.
+And to hold the wire in place, I used hot glue because I don't respect the Art of Watchmaking have anything better.
diff --git a/write/horological-crimes.md b/write/horological-crimes.md
index db08a86..083d1fd 100644
--- a/write/horological-crimes.md
+++ b/write/horological-crimes.md
@@ -15,10 +15,10 @@ On a whim I decided to see if I could figure out what was wrong and attempt to f
Only after halfway disassembling the clock did I decide to learn how these things are meant to work.
So I watched [one video](https://www.youtube.com/watch?v=d_pV8TGKfMc)
-Turns out that the second gear (directly engaged with the escapement gear) is slipping, because the "top"(back? relative to the clock face) bearing has been destroyed.
+Turns out that the second gear (directly engaged with the escapement gear) is slipping, because the "top" (back relative to the clock face) bearing has been destroyed.
I can fix this.
I stripped a short length of cable-tie into a 0.5mm diameter wire, bent it into a hook, and filled the side of the bearing thats broken.
-And to hold the wire in place, I used duct tape because I don't respect the Art of Watchmaking have anything better.
+And to hold the wire in place, I used hot glue because I don't respect the Art of Watchmaking have anything better.