diff --git a/site/horological-crimes.html b/site/horological-crimes.html index b3d3329..c18b8d9 100644 --- a/site/horological-crimes.html +++ b/site/horological-crimes.html @@ -26,9 +26,6 @@ TODO front image
On a whim I decided to see if I could figure out what was wrong and attempt to fix it. How hard could that possibly be?

-TODO image of interior
-

-

open pocket watch with many intricate gears visible

I am a professional

@@ -43,7 +40,8 @@ I stripped a short length of cable-tie into a 0.5mm diameter wire, bent it into And to hold the wire in place, I used duct tape because I don't respect the Art of Watchmaking have anything better.

-TODO image of bearing repair
+a small wire is inserted into the broken gearing
+the wire is now covered in hot glue

This seems to have worked pretty well as far as i can tell from winding up the clock and poking around. That gear is not moving sideways anymore and can rotate easily.
@@ -64,7 +62,11 @@ This is where I'm currently stuck, and most likely I'll abandon it forever. I do I tried to create a part that would hold the thicker(0.5mm) part of the gear, just below the bearing, but it's too tight against the rest of the parts. I'm sure that's possible with better tools but i'm out here using a cable tie wire as a drill and a plastic scrap instead of brass. It was fun but ultimately too difficult with no good tools.

-TODO images of plastic parts and drill
+a small wire in a drill
+a small wire in a drill
+

+

+maybe one day i will ocme back to this project and fix it, maybe not. It was fun anyway

home
diff --git a/site/index.html b/site/index.html index 509706d..7334242 100644 --- a/site/index.html +++ b/site/index.html @@ -29,6 +29,7 @@ this means it is

"content"

+- horological crimes
- photo archive
- snad (cell thing)
- internets