ch32_oled/ssd1306.h

/*
 * Single-File-Header for using SPI OLED
 * 05-05-2023 E. Brombaugh
 */

#ifndef _SSD1306_H
#define _SSD1306_H

#include <stdint.h>
#include <string.h>

// comfortable packet size for this OLED
#define SSD1306_PSZ 32

// characteristics of each type
#if !defined(SSD1306_64X32) && !defined(SSD1306_128X32) && !defined(SSD1306_128X64)
#error "Please define the SSD1306_WXH resolution used in your application"
#endif

#ifdef SSD1306_64X32
#define SSD1306_W 64
#define SSD1306_H 32
#define SSD1306_FULLUSE
#define SSD1306_OFFSET 32
#endif

#ifdef SSD1306_128X32
#define SSD1306_W 128
#define SSD1306_H 32
#define SSD1306_OFFSET 0
#endif

#ifdef SSD1306_128X64
#define SSD1306_W 128
#define SSD1306_H 64
#define SSD1306_FULLUSE
#define SSD1306_OFFSET 0
#endif

/*
 * send OLED command byte
 */
uint8_t ssd1306_cmd(uint8_t cmd)
{
	ssd1306_pkt_send(&cmd, 1, 1);
	return 0;
}

/*
 * send OLED data packet (up to 32 bytes)
 */
uint8_t ssd1306_data(uint8_t *data, uint8_t sz)
{
	ssd1306_pkt_send(data, sz, 0);
	return 0;
}

#define SSD1306_SETCONTRAST 0x81
#define SSD1306_SEGREMAP 0xA0
#define SSD1306_DISPLAYALLON_RESUME 0xA4
#define SSD1306_DISPLAYALLON 0xA5
#define SSD1306_NORMALDISPLAY 0xA6
#define SSD1306_INVERTDISPLAY 0xA7
#define SSD1306_DISPLAYOFF 0xAE
#define SSD1306_DISPLAYON 0xAF
#define SSD1306_SETDISPLAYOFFSET 0xD3
#define SSD1306_SETCOMPINS 0xDA
#define SSD1306_SETVCOMDETECT 0xDB
#define SSD1306_SETDISPLAYCLOCKDIV 0xD5
#define SSD1306_SETPRECHARGE 0xD9
#define SSD1306_SETMULTIPLEX 0xA8
#define SSD1306_SETLOWCOLUMN 0x00
#define SSD1306_SETHIGHCOLUMN 0x10
#define SSD1306_SETSTARTLINE 0x40
#define SSD1306_MEMORYMODE 0x20
#define SSD1306_COLUMNADDR 0x21
#define SSD1306_PAGEADDR 0x22
#define SSD1306_COMSCANINC 0xC0
#define SSD1306_COMSCANDEC 0xC8
#define SSD1306_CHARGEPUMP 0x8D
#define SSD1306_EXTERNALVCC 0x1
#define SSD1306_SWITCHCAPVCC 0x2
#define SSD1306_TERMINATE_CMDS 0xFF

/* choose VCC mode */
#define SSD1306_EXTERNALVCC 0x1
#define SSD1306_SWITCHCAPVCC 0x2
// #define vccstate SSD1306_EXTERNALVCC
#define vccstate SSD1306_SWITCHCAPVCC

// OLED initialization commands for 128x32
const uint8_t ssd1306_init_array[] =
	{
		SSD1306_DISPLAYOFF,			// 0xAE
		SSD1306_SETDISPLAYCLOCKDIV, // 0xD5
		0x80,						// the suggested ratio 0x80
		SSD1306_SETMULTIPLEX,		// 0xA8
#ifdef SSD1306_64X32
		0x1F, // for 64-wide displays
#else
		0x3F, // for 128-wide displays
#endif
		SSD1306_SETDISPLAYOFFSET,	// 0xD3
		0x00,						// no offset
		SSD1306_SETSTARTLINE | 0x0, // 0x40 | line
		SSD1306_CHARGEPUMP,			// 0x8D
		0x14,						// enable?
		SSD1306_MEMORYMODE,			// 0x20
		0x00,						// 0x0 act like ks0108
		SSD1306_SEGREMAP | 0x1,		// 0xA0 | bit
		SSD1306_COMSCANDEC,
		SSD1306_SETCOMPINS,	 // 0xDA
		0x12,				 //
		SSD1306_SETCONTRAST, // 0x81
		0x8F,
		SSD1306_SETPRECHARGE, // 0xd9
		0xF1,
		SSD1306_SETVCOMDETECT, // 0xDB
		0x40,
		SSD1306_DISPLAYALLON_RESUME, // 0xA4
		SSD1306_NORMALDISPLAY,		 // 0xA6
		SSD1306_DISPLAYON,			 // 0xAF --turn on oled panel
		SSD1306_TERMINATE_CMDS		 // 0xFF --fake command to mark end
};

// the display buffer
uint8_t ssd1306_buffer[SSD1306_W * SSD1306_H / 8];

/*
 * set the buffer to a color
 */
void ssd1306_setbuf(uint8_t color)
{
	memset(ssd1306_buffer, color ? 0xFF : 0x00, sizeof(ssd1306_buffer));
}

#ifndef SSD1306_FULLUSE
/*
 * expansion array for OLED with every other row unused
 */
const uint8_t expand[16] =
	{
		0x00,
		0x02,
		0x08,
		0x0a,
		0x20,
		0x22,
		0x28,
		0x2a,
		0x80,
		0x82,
		0x88,
		0x8a,
		0xa0,
		0xa2,
		0xa8,
		0xaa,
};
#endif

/*
 * Send the frame buffer
 */
void ssd1306_refresh(void)
{
	uint16_t i;

	ssd1306_cmd(SSD1306_COLUMNADDR);
	ssd1306_cmd(SSD1306_OFFSET);				 // Column start address (0 = reset)
	ssd1306_cmd(SSD1306_OFFSET + SSD1306_W - 1); // Column end address (127 = reset)

	ssd1306_cmd(SSD1306_PAGEADDR);
	ssd1306_cmd(0); // Page start address (0 = reset)
	ssd1306_cmd(7); // Page end address

#ifdef SSD1306_FULLUSE
	/* for fully used rows just plow thru everything */
	for (i = 0; i < sizeof(ssd1306_buffer); i += SSD1306_PSZ)
	{
		/* send PSZ block of data */
		ssd1306_data(&ssd1306_buffer[i], SSD1306_PSZ);
	}
#else
	/* for displays with odd rows unused expand bytes */
	uint8_t tbuf[SSD1306_PSZ], j, k;
	for (i = 0; i < sizeof(ssd1306_buffer); i += 128) // for each page
	{
		/* low nybble */
		for (j = 0; j < 128; j += SSD1306_PSZ)
		{
			for (k = 0; k < SSD1306_PSZ; k++)
				tbuf[k] = expand[ssd1306_buffer[i + j + k] & 0xf];

			/* send PSZ block of data */
			ssd1306_data(tbuf, SSD1306_PSZ);
		}

		/* high nybble */
		for (j = 0; j < 128; j += SSD1306_PSZ)
		{
			for (k = 0; k < SSD1306_PSZ; k++)
				tbuf[k] = expand[(ssd1306_buffer[i + j + k] >> 4) & 0xf];

			/* send PSZ block of data */
			ssd1306_data(tbuf, SSD1306_PSZ);
		}
	}
#endif
}

/*
 * plot a pixel in the buffer
 */
void ssd1306_drawPixel(uint8_t x, uint8_t y, uint8_t color)
{
	uint16_t addr;

	/* clip */
	if (x >= SSD1306_W)
		return;
	if (y >= SSD1306_H)
		return;

	/* compute buffer address */
	addr = x + SSD1306_W * (y / 8);

	/* set/clear bit in buffer */
	if (color)
		ssd1306_buffer[addr] |= (1 << (y & 7));
	else
		ssd1306_buffer[addr] &= ~(1 << (y & 7));
}

/*
 *  fast vert line
 */
void ssd1306_drawFastVLine(uint8_t x, uint8_t y, uint8_t h, uint8_t color)
{
	// clipping
	if ((x >= SSD1306_W) || (y >= SSD1306_H))
		return;
	if ((y + h - 1) >= SSD1306_H)
		h = SSD1306_H - y;
	while (h--)
	{
		ssd1306_drawPixel(x, y++, color);
	}
}

/*
 *  fast horiz line
 */
void ssd1306_drawFastHLine(uint8_t x, uint8_t y, uint8_t w, uint8_t color)
{
	// clipping
	if ((x >= SSD1306_W) || (y >= SSD1306_H))
		return;
	if ((x + w - 1) >= SSD1306_W)
		w = SSD1306_W - x;

	while (w--)
	{
		ssd1306_drawPixel(x++, y, color);
	}
}

/*
 * abs() helper function for line drawing
 */
int16_t gfx_abs(int16_t x)
{
	return (x < 0) ? -x : x;
}

/*
 * swap() helper function for line drawing
 */
void gfx_swap(uint16_t *z0, uint16_t *z1)
{
	uint16_t temp = *z0;
	*z0 = *z1;
	*z1 = temp;
}

/*
 * Bresenham line draw routine swiped from Wikipedia
 */
void ssd1306_drawLine(uint16_t x0, uint16_t y0, uint16_t x1, uint16_t y1, uint8_t color)
{
	int16_t steep;
	int16_t deltax, deltay, error, ystep, x, y;

	/* flip sense 45deg to keep error calc in range */
	steep = (gfx_abs(y1 - y0) > gfx_abs(x1 - x0));

	if (steep)
	{
		gfx_swap(&x0, &y0);
		gfx_swap(&x1, &y1);
	}

	/* run low->high */
	if (x0 > x1)
	{
		gfx_swap(&x0, &x1);
		gfx_swap(&y0, &y1);
	}

	/* set up loop initial conditions */
	deltax = x1 - x0;
	deltay = gfx_abs(y1 - y0);
	error = deltax / 2;
	y = y0;
	if (y0 < y1)
		ystep = 1;
	else
		ystep = -1;

	/* loop x */
	for (x = x0; x <= x1; x++)
	{
		/* plot point */
		if (steep)
			/* flip point & plot */
			ssd1306_drawPixel(y, x, color);
		else
			/* just plot */
			ssd1306_drawPixel(x, y, color);

		/* update error */
		error = error - deltay;

		/* update y */
		if (error < 0)
		{
			y = y + ystep;
			error = error + deltax;
		}
	}
}

/*
 *  draws a circle
 */
void ssd1306_drawCircle(int16_t x, int16_t y, int16_t radius, int8_t color)
{
	/* Bresenham algorithm */
	int16_t x_pos = -radius;
	int16_t y_pos = 0;
	int16_t err = 2 - 2 * radius;
	int16_t e2;

	do
	{
		ssd1306_drawPixel(x - x_pos, y + y_pos, color);
		ssd1306_drawPixel(x + x_pos, y + y_pos, color);
		ssd1306_drawPixel(x + x_pos, y - y_pos, color);
		ssd1306_drawPixel(x - x_pos, y - y_pos, color);
		e2 = err;
		if (e2 <= y_pos)
		{
			err += ++y_pos * 2 + 1;
			if (-x_pos == y_pos && e2 <= x_pos)
			{
				e2 = 0;
			}
		}
		if (e2 > x_pos)
		{
			err += ++x_pos * 2 + 1;
		}
	} while (x_pos <= 0);
}

/*
 *  draws a filled circle
 */
void ssd1306_fillCircle(int16_t x, int16_t y, int16_t radius, int8_t color)
{
	/* Bresenham algorithm */
	int16_t x_pos = -radius;
	int16_t y_pos = 0;
	int16_t err = 2 - 2 * radius;
	int16_t e2;

	do
	{
		ssd1306_drawPixel(x - x_pos, y + y_pos, color);
		ssd1306_drawPixel(x + x_pos, y + y_pos, color);
		ssd1306_drawPixel(x + x_pos, y - y_pos, color);
		ssd1306_drawPixel(x - x_pos, y - y_pos, color);
		ssd1306_drawFastHLine(x + x_pos, y + y_pos, 2 * (-x_pos) + 1, color);
		ssd1306_drawFastHLine(x + x_pos, y - y_pos, 2 * (-x_pos) + 1, color);
		e2 = err;
		if (e2 <= y_pos)
		{
			err += ++y_pos * 2 + 1;
			if (-x_pos == y_pos && e2 <= x_pos)
			{
				e2 = 0;
			}
		}
		if (e2 > x_pos)
		{
			err += ++x_pos * 2 + 1;
		}
	} while (x_pos <= 0);
}

/*
 *  draw a rectangle
 */
void ssd1306_drawRect(uint8_t x, uint8_t y, uint8_t w, uint8_t h, uint8_t color)
{
	ssd1306_drawFastVLine(x, y, h, color);
	ssd1306_drawFastVLine(x + w - 1, y, h, color);
	ssd1306_drawFastHLine(x, y, w, color);
	ssd1306_drawFastHLine(x, y + h - 1, w, color);
}

/*
 * fill a rectangle
 */
void ssd1306_fillRect(uint8_t x, uint8_t y, uint8_t w, uint8_t h, uint8_t color)
{
	uint8_t m, n = y, iw = w;

	/* scan vertical */
	while (h--)
	{
		m = x;
		w = iw;
		/* scan horizontal */
		while (w--)
		{
			/* invert pixels */
			ssd1306_drawPixel(m++, n, color);
		}
		n++;
	}
}

/*
 * invert a rectangle in the buffer
 */
void ssd1306_xorrect(uint8_t x, uint8_t y, uint8_t w, uint8_t h)
{
	uint8_t m, n = y, iw = w;

	/* scan vertical */
	while (h--)
	{
		m = x;
		w = iw;
		/* scan horizontal */
		while (w--)
		{
			/* invert pixels */
			ssd1306_xorPixel(m++, n);
		}
		n++;
	}
}

/*
 * initialize I2C and OLED
 */
uint8_t ssd1306_init(void)
{
	// pulse reset
	ssd1306_rst();

	// initialize OLED
	uint8_t *cmd_list = (uint8_t *)ssd1306_init_array;
	while (*cmd_list != SSD1306_TERMINATE_CMDS)
	{
		if (ssd1306_cmd(*cmd_list++))
			return 1;
	}

	// clear display
	// ssd1306_setbuf(0);
	ssd1306_refresh();

	return 0;
}

#endif