init

computer/11/torment_nexus.lua

@@ -0,0 +1,166 @@
+require("follow_rail")
+
+PROGRESS_FILE = "torment_progress.txt"
+
+function turnCW(dir)
+	if dir == 1 then
+		turtle.turnRight()
+	elseif dir == -1 then
+		turtle.turnLeft()
+	else
+		error("bad dir " .. tostring(dir))
+	end
+end
+
+function station_wheels()
+	print("beginning wheel building step")
+	local file = fs.open(PROGRESS_FILE, "r")
+	local progress = tonumber(file.readAll())
+	file.close()
+
+	turtle.turnRight()
+	turtle.forward()
+	turtle.forward()
+	turtle.turnLeft()
+
+	print(progress, "levels already done")
+	for i = 1,(progress*4) do
+		turtle.down()
+	end
+
+	print("right gear gutter")
+	for i = 1,4 do
+		turtle.digDown()
+		turtle.down()
+		turtle.dig()
+	end
+	turtle.forward()
+	-- currently under gears, at the bottom of the layer
+	turtle.dig()
+	turtle.forward()
+	turtle.turnRight()
+	turtle.dig()
+	turtle.forward()
+	turtle.digUp()
+	turtle.up()
+	turtle.turnLeft()
+	turtle.turnLeft()
+	-- cunter right side of wheel section
+	print("cutting wheel section")
+	local dir = 1
+	for slice = 1,16 do
+		for x = 1,6 do
+			turtle.digUp()
+			turtle.digDown()
+			turtle.dig()
+			turtle.forward()
+		end
+		turtle.digUp()
+		turtle.digDown()
+		turnCW(dir)
+		turtle.dig()
+		turtle.forward()
+		turnCW(dir)
+		dir = -dir
+	end
+
+	print("placing right wheels")
+	turtle.turnLeft()
+	turtle.forward()
+	turtle.turnRight()
+	turtle.forward()
+	turtle.turnRight()
+	-- TODO select wheels
+	turtle.select(1)
+	for w = 1,16 do
+		turtle.back()
+		turtle.place()
+	end
+	print("placing right cogs")
+	-- TODO select cogs
+	turtle.select(2)
+	turtle.back()
+	turtle.place()
+	turtle.up()
+	turtle.place()
+	turtle.up()
+	turtle.place()
+	turtle.down()
+	turtle.down()
+	turtle.down()
+	turtle.place()
+	turtle.up()
+	print("moving to left gutter")
+	turtle.turnLeft()
+	for i = 1, 4 do
+		turtle.dig()
+		turtle.forward()
+	end
+	turtle.turnRight()
+	turtle.dig()
+	turtle.forward()
+	turtle.forward()
+	-- now in a wheel center
+	print("digging water gutter")
+	turtle.turnRight()
+	turtle.forward()
+	turtle.forward()
+	turtle.turnLeft()
+	turtle.down()
+	turtle.digDown()
+	for i = 1,15 do
+		turtle.forward()
+		turtle.digDown()
+	end
+	print("placing left wheels")
+	turtle.up()
+	turtle.turnLeft()
+	turtle.forward()
+	turtle.forward()
+	turtle.turnRight()
+	-- TODO select wheels
+	turtle.select(1)
+	for i = 1,16 do
+		turtle.back()
+		turtle.place()
+	end
+	turtle.back()
+	-- TODO select cogs
+	turtle.select(2)
+	turtle.digDown()
+	turtle.down()
+	print("placing left cogs")
+	for y = 1,4 do
+		turtle.dig()
+		turtle.place()
+		turtle.digUp()
+		turtle.up()
+	end
+
+	print("returning to start")
+	for i = 1,(progress*4) do
+		turtle.up()
+	end
+
+	turtle.turnRight()
+	turtle.forward()
+	turtle.forward()
+	turtle.turnLeft()
+
+	file = fs.open(PROGRESS_FILE, "w")
+	file.write(tostring(progress + 1))
+	file.close()
+end
+function station_wood() end
+function station_andesite() end
+
+function run()
+	--station_wood()
+	--follow_rail()
+	station_wheels()
+	--follow_rail()
+	--station_andesite()r
+	--follow_rail()
+end
+
+run()