2023-12-20 14:58:57 +01:00
---
weight: 300
title: Dongles over IP
---
# Dongles over IP
This setup uses USB-over-IP to let you plug your Watchman dongles (the ones that comes with Tundra / Vive Trackers) into a different computer (like a Raspberry Pi). These dongles can then be used with trackers as well as index/vive/pimax/etc controllers.
#### The benefits of this setup
2023-12-20 15:07:27 +01:00
- Dongles can be far away from your computer
- Dongles can be far away from radio interference
2023-12-20 14:58:57 +01:00
- You can conveniently hide the ugly cabling under/behind a piece of furniture
#### Requirements
- Main PC connected to the same wired network as the dongle host. While you can technically use WiFi, it's not recommended as it has a high chance to interfere with the Bluetooth connection of dongles.
### Dongle host setup
2023-12-20 15:07:27 +01:00
1. Install `usbip` and `python3`` on dongle host. On debian/raspbian it's ` apt install usbip python3`.
2023-12-20 14:58:57 +01:00
2. Put the `usbip-bind` script (from below) on the dongle host, (e.g. into `/root` )
`sudo wget https://gist.github.com/galister/2fbd23cfaff8ba4839efa13184e4e197/raw/13b0b2fd6dee609169b6a98b302f6a6ac5c2d307/usbip-bind -O /root/usbip-bind; sudo chmod +x /root/usbip-bind`
2023-12-20 15:07:27 +01:00
3. Set up `usbip-bind bind` to run on startup. On Raspbian: `echo '/root/usbip-bind bind' | sudo tee -a /etc/rc.local`
2023-12-20 14:58:57 +01:00
4. With your dongles plugged in, run `sudo /root/usbip-bind bind` , to bind them for the first time
2023-12-20 15:07:27 +01:00
### Main PC setup:
2023-12-20 14:58:57 +01:00
1. Download `usbdongle` and put it somewhere safe:
`wget https://gist.github.com/galister/2fbd23cfaff8ba4839efa13184e4e197/raw/13b0b2fd6dee609169b6a98b302f6a6ac5c2d307/usbdongle; chmod +x usbdongle`
2. Edit `usbdongle` and set the `DONGLE_HOST` variable to the IP or hostname of your dongle host. (run `ip addr` on dongle host to find out)
2023-12-20 15:07:27 +01:00
3. Optional: If you don't want to enter your sudo password for `usbdongle` every time, run this as a single multi-line command (as your non-root user!):
2023-12-20 14:58:57 +01:00
```bash
echo "$USER ALL=(root) NOPASSWD: /usr/sbin/usbip detach *
$USER ALL=(root) NOPASSWD: /usr/sbin/usbip attach *
$USER ALL=(root) NOPASSWD: /usr/sbin/usbip list *
$USER ALL=(root) NOPASSWD: /sbin/modprobe vhci-hcd" | sudo tee -a /etc/sudoers
```
4. Run `usbdongle` before starting SteamVR/Monado (or on startup/login)
### Things to watch out for
- **Whenever a new dongle was plugged in** or an existing re-plugged, run `sudo /root/usbip-bind rebind` on the dongle host
- **If the dongle host is rebooted**, stop steamvr/monado, run `usbdongle` and then re-start SteamVR/Monado.
- In case there's a network issue and `usbdongle` can't rebind even after running `usbip-bind rebind` on dongle host, try rebooting both hosts.
- By default, the Linux kernel supports up to 8 virtual USB devices.
- If you need more than 8, you can change the `CONFIG_USBIP_VHCI_HC_PORTS` kernel config option and re-compile your kernel.
- A Pi 3.0 Model A is known to handle 2x Tundra SW4 dongles or 8 Vive dongles without requiring a powered hub
## Scripts
You can find the original ones [here ](https://gist.github.com/galister/2fbd23cfaff8ba4839efa13184e4e197 ).
## Support
Reach out to @galister on Discord/Matrix
