diff --git a/content/docs/fossvr/wivrn/_index.md b/content/docs/fossvr/wivrn/_index.md
index 34e4333..41e1827 100644
--- a/content/docs/fossvr/wivrn/_index.md
+++ b/content/docs/fossvr/wivrn/_index.md
@@ -17,6 +17,20 @@ Current limitations are a fixed bitrate and network protocol streaming only, ple
 
 Should you utilize [Envision](/docs/fossvr/envision/) for WiVRn setup, please ensure your APK and WiVRn server match as closely as possible. Check the WiVRn github [actions](https://github.com/WiVRn/WiVRn/actions) for an APK matching your server build to install to your headset.
 
+## Wired WiVRn
+
+Use WiVRn with a cable instead of Wifi. Use a 5Gbps cable & port at the very least.
+
+Steps:
+- Enable TCP Only mode, either via Envision or the [JSON configuration](https://github.com/WiVRn/WiVRn?tab=readme-ov-file#configuration)!
+- If WiVRn is running on the headset, close it now.
+- Connect the headset via USB
+- Run the following `adb` commands:
+  ```bash
+  adb reverse tcp:9757 tcp:9757
+  adb shell am start -a android.intent.action.VIEW -d "wivrn://127.0.0.1" org.meumeu.wivrn
+  ```
+
 ## WiVRn + Lighthouse driver
 
 This section covers using WiVRn with any lighthouse-tracked device: Index/Vive controllers, Vive/Tundra trackers, etc. Important steps are marked with 🔴.
@@ -30,11 +44,11 @@ This section covers using WiVRn with any lighthouse-tracked device: Index/Vive c
   - `WIVRN_USE_STEAMVR_LH=1`
   - `LH_DISCOVER_WAIT_MS=6000`
 
-🔴 Perform a **Clean Build** after changing these!
+🔴 Perform a **Clean Build** after changing the CMake flags!
 
 If not using Envision, simply pass `-DWIVRN_FEATURE_STEAMVR_LIGHTHOUSE=ON` to cmake and export the env variables before starting `wivrn-server`.
 
-🔴 Grab [Motoc](/docs/fossvr/motoc/), this can calibrate the two tracking technologies to work together.
+[Motoc](/docs/fossvr/motoc/) will be used to calibrate the two tracking technologies to work together.
 
 Discovery happens only on first connection, so be sure to **have all lighthouse devices powered on and in line of sight of base stations before connecting the headset!**