32 lines
1 KiB
Markdown
32 lines
1 KiB
Markdown
# leko pona
|
|
|
|
|
|
|
|
|
|
## Related repos
|
|
- [ZMK config](/CrispyPin/zmk-config/) (layout based on colemak-dh)
|
|
- [Ergogen config](https://github.com/CrispyPin/ergogen/) used to generate the pcb
|
|
|
|
## Parts list
|
|
- nice!nano x2
|
|
- 12 pin socket strips x4
|
|
- JST-PH battery connectors x2
|
|
- PCM12 power switch x2
|
|
- 3.7V 130mAh battery x2
|
|
- choc switches x36
|
|
- choc keycaps x36
|
|
- choc hotswap sockets x36 (optional)
|
|
- rubber feet (optional)
|
|
|
|
## Notes about assembly
|
|
- Solder pads for the reversible footprint should be soldered on the underside of the board if you want the back of the nice!nano facing up (like in the picture)
|
|
- The battery connector is slightly asymmetrical on the two halves, it should be clear from the outline on the silkscreen which way to put it
|
|
- If your batteries are small enough you can tuck them under the controllers
|
|
- You can use a permanent marker to get a clean look on the edges of the pcbs
|
|
|
|
|
|
|
|
## LEGO tenting set
|
|
[Instructions](lego_tenting.md)
|
|
|
|
|